Latest NSE8_812 Demo, Valid Dumps NSE8

TestBraindump Fortinet NSE8_812 practice exam is the most thorough, most accurate and latest practice test. You will find that it is the only materials which can make you have confidence to overcome difficulties in the first. Fortinet NSE8_812 exam certification are recognized in any country in the world and all countries will be treate it equally. Fortinet NSE8_812 Certification not only helps to improve your knowledge and skills, but also helps your career have more possibility.

Fortinet NSE8_812 (Fortinet NSE 8 - Written Exam) Certification Exam is a comprehensive examination conducted by Fortinet for information technology professionals and security practitioners. Fortinet NSE 8 - Written Exam (NSE8_812) certification exam targets IT professionals and security experts who aim to obtain knowledge and skills in designing, deploying, configuring, operating, and troubleshooting complex security solutions using Fortinet's latest products and best practices.

Latest NSE8_812 Demo

Take NSE8_812 Practice Exam Questions (Desktop & Web-Based)

These latest Fortinet NSE 8 - Written Exam (NSE8_812) (NSE8_812) Questions were made by TestBraindump professionals after working day and night so that users can prepare for the Fortinet NSE8_812 exam successfully. TestBraindump even guarantees you that you can pass the Fortinet NSE8_812 Certification test on the first try with your untiring efforts.

Fortinet NSE 8 - Written Exam (NSE8_812) Sample Questions (Q27-Q32):

NEW QUESTION # 27
Refer to the CLI configuration of an SSL inspection profile from a FortiGate device configured to protect a web server:

Based on the information shown, what is the expected behavior when an HTTP/2 request comes in?

A. FortiGate will forward the traffic without modifying the ALPN header.
B. FortiGate will strip the ALPN header and forward the traffic.
C. FortiGate will reject all HTTP/2 ALPN headers.
D. FortiGate will rewrite the ALPN header to request HTTP/1.

Answer: B

Explanation:
When an HTTP/2 request comes in, FortiGate will strip the Application-Layer Protocol Negotiation (ALPN) header and forward the traffic as HTTP/1.1 to the real server. This is because FortiGate does not support HTTP/2 inspection, and therefore cannot process ALPN headers that indicate HTTP/2 support. Reference: https://docs.fortinet.com/document/fortigate/6.4.0/cookbook/103438/application-detection-on-ssl-offloaded-traffic

NEW QUESTION # 28
Refer to the exhibits.

A customer wants to deploy 12 FortiAP 431F devices on high density conference center, but they do not currently have any PoE switches to connect them to. They want to be able to run them at full power while having network redundancy From the FortiSwitch models and sample retail prices shown in the exhibit, which build of materials would have the lowest cost, while fulfilling the customer's requirements?

A. 1x FortiSwitch 248EFPOE
B. 2x FortiSwitch 124E-FPOE
C. 2x FortiSwitch 248E-FPOE
D. 2x FortiSwitch 224E-POE

Answer: C

Explanation:
The customer wants to deploy 12 FortiAP 431F devices on a high density conference center, but they do not have any PoE switches to connect them to. They want to be able to run them at full power while having network redundancy. PoE switches are switches that can provide both data and power to connected devices over Ethernet cables, eliminating the need for separate power adapters or outlets. PoE switches are useful for deploying devices such as wireless access points, IP cameras, and VoIP phones in locations where power outlets are scarce or inconvenient. The FortiAP 431F is a wireless access point that supports PoE+ (IEEE 802.3at) standard, which can deliver up to 30W of power per port. The FortiAP 431F has a maximum power consumption of 25W when running at full power. Therefore, to run 12 FortiAP 431F devices at full power, the customer needs PoE switches that can provide at least 300W of total PoE power budget (25W x 12). The customer also needs network redundancy, which means that they need at least two PoE switches to connect the FortiAP devices in case one switch fails or loses power. From the FortiSwitch models and sample retail prices shown in the exhibit, the build of materials that has the lowest cost while fulfilling the customer's requirements is 2x FortiSwitch 248E-FPOE. The FortiSwitch 248E-FPOE is a PoE switch that has 48 GE ports with PoE+ capability and a total PoE power budget of 370W. It also has 4x 10 GE SFP+ uplink ports for high-speed connectivity. The sample retail price of the FortiSwitch 248E-FPOE is $1,995, which means that two units will cost $3,990. This is the lowest cost among the other options that can meet the customer's requirements. Option A is incorrect because the FortiSwitch 248EFPOE is a non-PoE switch that has no PoE capability or power budget. It cannot provide power to the FortiAP devices over Ethernet cables. Option B is incorrect because the FortiSwitch 224E-POE is a PoE switch that has only 24 GE ports with PoE+ capability and a total PoE power budget of 185W. It cannot provide enough ports or power to run 12 FortiAP devices at full power. Option D is incorrect because the FortiSwitch 124E-FPOE is a PoE switch that has only 24 GE ports with PoE+ capability and a total PoE power budget of 185W. It cannot provide enough ports or power to run 12 FortiAP devices at full power. Reference: https://www.fortinet.com/content/dam/fortinet/assets/data-sheets/FortiSwitch_Secure_Access_Series.pdf https://www.fortinet.com/content/dam/fortinet/assets/data-sheets/FortiAP_400_Series.pdf

NEW QUESTION # 29
Refer to the exhibit, which shows the high availability configuration for the FortiAuthenticator (FAC1).

Based on this information, which statement is true about the next FortiAuthenticator (FAC2) member that will join an HA cluster with this FortiAuthenticator (FAC1)?

A. The FortiToken license will need to be installed on the FAC2.
B. FSSO sessions from FAC1 will be synchronized to FAC2.
C. FAC2 can have its HA interface on a different network than FAC1.
D. FAC2 can only process requests when FAC1 fails.

Answer: B

Explanation:
When FortiAuthenticator operates in cluster mode, it provides active-passive failover and synchronization of all configuration and data, including FSSO sessions, between the cluster members. Therefore, if FAC1 is the active unit and FAC2 is the standby unit, any FSSO sessions from FAC1 will be synchronized to FAC2. If FAC1 fails, FAC2 will take over the active role and continue to process the FSSO sessions. References: https://docs.fortinet.com/document/fortiauthenticator/6.1.2/administration-guide/122076/high-availability

NEW QUESTION # 30
SD-WAN is configured on a FortiGate. You notice that when one of the internet links has high latency the time to resolve names using DNS from FortiGate is very high.
You must ensure that the FortiGate DNS resolution times are as low as possible with the least amount of work.
What should you configure?

A. Configure local out traffic to use the outgoing interface based on SD-WAN rules with the interface IP and configure an SD-WAN rule to the DNS server.
B. Configure local out traffic to use the outgoing interface based on SD-WAN rules with a manual defined IP associated to a loopback interface and configure an SD-WAN rule from the loopback to the DNS server.
C. Configure two DNS servers and use DNS servers recommended by the two internet providers.
D. Configure an SD-WAN rule to the DNS server and use the FortiGate interface IPs in the source address.

Answer: A

Explanation:
SD-WAN is a feature that allows users to optimize network performance and reliability by using multiple WAN links and applying rules based on various criteria, such as latency, jitter, packet loss, etc. One way to ensure that the FortiGate DNS resolution times are as low as possible with the least amount of work is to configure local out traffic to use the outgoing interface based on SD-WAN rules with the interface IP and configure an SD-WAN rule to the DNS server. This means that the FortiGate will use the best WAN link available to send DNS queries to the DNS server according to the SD-WAN rule, and use its own interface IP as the source address. This avoids NAT issues and ensures optimal DNS performance. References: https://docs.fortinet.com/document/fortigate/7.0.0/sd-wan/19662/sd-wan

NEW QUESTION # 31
Refer to the exhibit.

A customer wants FortiClient EMS configured to deploy to 1500 endpoints. The deployment will be integrated with FortiOS and there is an Active Directory server.
Given the configuration shown in the exhibit, which two statements about the installation are correct? (Choose two.)

A. You must use Standard or Enterprise SQL Server rather than the included SQL Server Express
B. You can only deploy initial installations to Windows clients.
C. The Windows clients only require "File and Printer Sharing0 allowed and the rest is handled by Active Directory group policy
D. A client can be eligible for multiple enabled configurations on the EMS server, and one will be chosen based on first priority
E. If no client update time is specified on EMS, the user will be able to choose the time of installation if they wish to delay.

Answer: C,E

Explanation:
A is correct because if no client update time is specified on EMS, the user will be able to choose the time of installation if they wish to delay. This is because the FortiClient EMS server will not force the installation on the client.
E is correct because the Windows clients only require "File and Printer Sharing" allowed and the rest is handled by Active Directory group policy. This is because the Active Directory group policy will configure the Windows clients to automatically install FortiClient and the FortiClient EMS server will only need to push the initial configuration to the clients.
The other options are incorrect. Option B is incorrect because a client can only be eligible for one enabled configuration on the EMS server. Option C is incorrect because you can deploy initial installations to both Windows and macOS clients. Option D is incorrect because you can use the included SQL Server Express to deploy FortiClient EMS.
References:
Deploying FortiClient EMS | FortiClient / FortiOS 7.4.0 - Fortinet Document Library Configuring FortiClient EMS | FortiClient / FortiOS 7.4.0 - Fortinet Document Library FortiClient EMS installation requirements | FortiClient / FortiOS 7.4.0 - Fortinet Document Library

NEW QUESTION # 32
......

No software installation is required to go through the web-based Fortinet NSE8_812 practice test. The PDF file of NSE8_812 real exam questions is easy to use on laptops, tablets, and smartphones. We have added all the Fortinet NSE8_812 Questions, which have a chance to appear in the NSE8_812 real test. Our Fortinet NSE 8 - Written Exam (NSE8_812) (NSE8_812) dumps PDF exam questions are beneficial to prepare for the test in less time.

Valid Dumps NSE8_812 Book: https://www.testbraindump.com/NSE8_812-exam-prep.html