Quick Adaptor manufacturers Quick Adaptor for PE Quick Adaptor for PE is used on PVC/PE pipe. It has a gasket and a restained brass ring(alternative) .When you put the pipe in the adaptor body and fasten the bolts, the brass ring will fasten the pipe to avoid it pull out. 1.Diameter from DN40 TO DN400 2.The body is made by ductile iron material 3.The gasket is EPDM and suitable for drink water or NBR for GAS 4.The body can Resin coated with 150 um 5.quick adaptor are designed for use on air,water,sewer and gas pipelines. 6. The adaptors are for jointing with PVC pipes or PE pipes . 7.Quick adaptor can be manufactured to specified flange drilling such as BS4504 PN10,16,25,40,BS10 Table D,E and F or ANSI flange drillings Quick Adaptor for PE Specification MaterialDuctile iron Quick adaptor SizeDN40-DN400 Rubber gasketEPDM GripCopper alloy Quick Adaptor for PE Dimension in mm: ODFLANGE(PN10 or PN16)L 635050 6360/6550 756555 908060 11010065 1251257 14012570 16015080 18015085 20020090 22520095 250250105 315300120 355300130 400400140 Quick Adaptor for PE Standard: ISO2531锛孍N545 Pressure: PN10/PN16 Body material: Ductile iron with FBE ( fusion bonded epoxy) coating or Epoxy painting; Gaskets are NBR or EPDM; Gripping teeth material: Brass. Bolts and Nuts: Carbon steel with galvanized zinc plated G4.8/G8.8, or SS304/SS316. Package: Wooden cases and protection layer. Application: Quick adaptor is used for connecting PE pipe. The restrained brass can fastend the pe pipe better.Quick Adaptor manufacturers website:http://www.tianyisunspipeline.com/adaptor/quick-adaptor/