Linksys Velop Setup app is not that tough. We will try to explain the Complete Setup steps. The Linksys wired or wireless extenders are known for extending the WiFi connection and the better coverage speed for an all over signal transmission in the house without any interruption.

Ensure that the router is in connection with the extender. The power outlet should also be switched on, while the process. when you are up for a network setup process. Either you are setting up the device for the first time. (If not you can use an ethernet wire instead).

Now check whether you see a green light or not. While you press the power button. Because green is probably a signal of strong network connection. http//extender.linksys.com is also a great option as, It can help you login into the portal and you can also configure the device easily. If we talk about the light signal then, make sure all the lights need to be on. 

In case the lights are not on, wait and keep on holding the button for long. Though if the router does not come back with the blue or green light connection light it is a connection failure. Don't forget to restart the devices after five seconds. If this process does not work, then see the other option.

An ethernet connection is probably the easiest one. Plug an extender and wait till it boots up. After a while, connect the device via the medium of an ethernet cable. For login into the extender settings, locate Web browser in the address bar type 192.168.1.1 IP address. Now just enter the password and username on the extenders interface. Though the Admin is the username and password is password. Now add the network settings and enter the wireless networks. Then add your password. After this, click on the next to finish the Linksys velop setup.